41-60 / 61 Issues

Issue 2 (2013) Volume 7

Issue 2 (2013) Volume 7

New method in plastics joining technology

Investigation into the fatigue behaviour of joints executed by means of heated tool butt welding using the example of plastic pipes and windows

Material and process influences during the riveting of technical plastics

Issue 1 (2013) Volume 7

Issue 1 (2013) Volume 7

New possibilities in the processing of semi-finished plastic products with innovative machine technology

Using FE calculation for the optimisation of the clamping pressure distribution in the case of the laser transmission welding of complex components

Introduction of plastic tanks on to the market in the event of any deviations from the DIBt requirements

Issue 3-4 (2012) Volume 6

Issue 3-4 (2012) Volume 6

Making connections - Ultrasonic riveting of high-temperature plastics

Economic and ecological assessments with regard to the welding of plastic pipes

Changeable and flexible: A new production concept for plastics processing - for joining technology as well

Issue 2 (2012) Volume 6

Issue 2 (2012) Volume 6

Welding of similar plastics with extremely different rheological properties

New concepts for joining dissimilar thermoplastics using laser radiation

Procedure for assessing the short-time local mechanical properties of welds in PE100 pipes

Issue 1 (2012) Volume 6

Issue 1 (2012) Volume 6

Laser welding of plastics - Adjustment of the material or the wavelength?

Adhesive bonding using vibration technology - Fast, self-cleaning and with an assured quality

Modelling and simulation of the heated tool butt welding process using CFD (computational fluid dynamics) software

Issue 3-4 (2011) Volume 5

Issue 3-4 (2011) Volume 5

Elektrofusion couplers made of PE 100-RC offer new possibilities

WPCs are weldable by means of HS, US and VIB

Self-optimisation and quality assurance on the basis of a new machine concept in the case of heated tool welding

Issue 2 (2011) Volume 5

Issue 2 (2011) Volume 5

Investigation into the oxide coat formation on PE pipes and its removal before sleeve welding with an incorporated heating element

Design-related and process technology aspects regarding the laser transmission welding of large format, thin walled plastic components–Part 2

Increase in strength by combining the mechanical joining and hot-melt adhesive bonding of thermoplastic-metal mixed joints

Issue 1 (2011) Volume 5

Issue 1 (2011) Volume 5

Development of the sleeve welding process with an incorporated heating element for the joining of large-diameter pipes made of polyethylene using universally applicable flexible wound sleeves

Process temperature measurement in infrared welding

Investigations into the hygroscopic property of chlorinated polyvinyl chloride (PVC-C) as well as into its effect on the joining technology

Issue 3-4 (2010) Volume 4

Issue 3-4 (2010) Volume 4

Welding of large-diameter pipelines (DN 1,600 mm) by the Persian Gulf

Terahertz spectroscopy for the non-destructive testing of plastic joints with focus on weld quality

Development of a test procedure for establishing the mechanical properties of electro fusion and heated tool sleeve welds with mechanised torsional and linear shear tests (Part 2: The linear shear test)

Issue 2 (2010) Volume 4

Issue 2 (2010) Volume 4

Design of structural adhesively bonded joints between fibre-reinforced plastic and metal for wind energy installations

Evaluation and improvement of the economic efficiency of welding PVC window profiles

Investigations into the melt adhesion during heated tool welding

Issue 1 (2010) Volume 4

Issue 1 (2010) Volume 4

Longitudinal and torsional ultrasonic welding - A comparison of the processes

Proper bodywork repair of plastic components of motor vehicles according to the DVS 1110-3 technical code

Optical residual stress analysis of laser beam welded plastic components

Issue 4 (2009) Volume 3

Issue 4 (2009) Volume 3

Prices of plastics in October and November 2009

Investigations into the residual melt coat thickness as a new characteristic for process optimisation in the case of ultrasonic welding

Laser transmission welding of thermoplastic composites – Fundamental investigations into the influence of the carbon fibre reinforcement and orientation on the weld formation

Issue 3 (2009) Volume 3

Issue 3 (2009) Volume 3

Injection moulding machine with 500 t closing force

Multi-orbital friction welding of pipes made of polyolefins

Contribution to the hot gas extrusion welding of sealing sheets made of flexible polyolefins (FPO/TPO) in tunnel construction

Issue 2 (2009) Volume 3

Issue 2 (2009) Volume 3

Numerical analyses of rectangular tanks made from SIMONA twin-wall sheets

Laser transmission welding - The morphology as the key to the successful process designing

The decay phase as the decisive influencing variable during the vibration welding of plastics

Issue 1 (2009) Volume 3

Issue 1 (2009) Volume 3

Electrically conductive plastic pipelines for utilisation in explosion hazard areas

Investigations into the processing and joining of high-performance plastics

Influence of the beam forming and the intensity distribution on the process limits in the process of laser transmission welding

Issue 4 (2008) Volume 2

Issue 4 (2008) Volume 2

The certified plastics adhesive bonder

Heated tool butt welding of WPCs with high proportions of fillers

Flexible 3D joining process for complex fibre composite components

Issue 3 (2008) Volume 2

Issue 3 (2008) Volume 2

MOTOMAN with shelf-type robots at Fakuma

New product egeplast 9010 PE 100

LIMO 350 W pump modules

Issue 2 (2008) Volume 2

Issue 2 (2008) Volume 2

Plastics training according to the technical codes of DVS strengthens the plastics-processing sector

Torsional ultrasonic welding

Induction welding of fiber reinforced polymer composites

Issue 1 (2008) Volume 2

Issue 1 (2008) Volume 2

Requirements on shear and peel tests for sleeve welding with an incorporated electric heating element and heated tool sleeve welding on pipes and fittings

Fluoroplastic linings – Individual solutions for complex requirements

Welding and testing parameters for pipes made of polypropylene (PP) with wall thicknesses up to 100 mm

Issue 2 (2007) Volume 1

Issue 2 (2007) Volume 1

Economic Optimisation Potential of Pipes with a Crack Resistant Polyethylene and Protective Outer Layer during Heated Element Butt Welding

Hybrid welding of plastics - The combined utilisation of laser radiation and heating radiation during the welding process opens up totally new fields of application

Plastic double pipe systems with leak location systems for the safe transport of water-endangering media