Prof. Dr.-Ing. Volker Schöppner

Volker Schöppner studied mechanical engineering with a specialisation in plastics technology. After completing his doctorate, he was a senior engineer at the Institute for Plastics Technology in Paderborn. He then moved to industry, where he held various positions. Since 2007, Prof. Dr.-Ing. Volker Schöppner has been Head of Plastics Technology Paderborn and holds the professorship of Plastics Processing.

19 Artikel

Effects of different heating strategies on infrared-heated polyphthalamides

M. Sc. Karina Gevers, M. Sc. Lucas Schraa, M. Eng. Paul Töws, Prof. Dr.-Ing. Volker Schöppner, Dr.-Ing. Kai Uhlig, Prof. Dr.-Ing. Markus Stommel, M. Eng. Julia Decker

Issue 3-4 (2023) Volume 17

Peer-reviewed papers, 182 - 188

Characteristic weld values for the designing of high-temperature-resistant thermoplastic components with optimised service lives

M. Sc. Sascha Vogtschmidt, Prof. Dr.-Ing. Volker Schöppner

Issue 1 (2023) Volume 17

Peer-reviewed papers, 36 - 43

Development of scale-up rules for the quasisimultaneous laser transmission welding (QSW) of thermoplastics

M. Sc. Theresa Arndt, Prof. Dr.-Ing. Volker Schöppner

Issue 1 (2023) Volume 17

Peer-reviewed papers, 20 - 27

Effects of different heating strategies on the quasi-static and cyclic load-bearing capacities of infrared-welded, glass-fibre-reinforced thermoplastic components

M. Sc. Karina Gevers, M. Sc. Lucas Schraa, M. Eng. Paul Töws, Prof. Dr.-Ing. Volker Schöppner, Dr.-Ing. Kai Uhlig, Prof. Dr.-Ing. Markus Stommel, M. Eng. Julia Decker

Issue 3-4 (2022) Volume 16

Peer-reviewed papers, 182 - 189

Hot gas butt welding of plastics

Dipl.-Ing. Mirko Albrecht, M. Sc. Max Bialaschik, Prof. Dr.-Ing. Michael Gehde, Prof. Dr.-Ing. Volker Schöppner

Issue 3-4 (2021) Volume 15

Peer-reviewed papers, 162 - 169

Alternating strain welding - Development of a joining technology for 3D geometries

Prof. Dr.-Ing. Volker Schöppner, M. Sc. Isabel Fiebig, M. Sc. Sascha Vogtschmidt

Issue 3-4 (2020) Volume 14

Peer-reviewed papers, 172 - 179

Good weld – bad weld: Selected aspects for the assessment of laser transmission welding

Prof. Dr.-Ing. Volker Schöppner, Prof. Dr.-Ing. Michael Schmidt, Prof. Dr.-Ing. Thomas Niendorf, M. Sc. Andrea Wübbeke, M. Sc. Bastian Geißler, Dr.-Ing. Arnaud Magnier, B. Sc. Fabian Schriegel, Prof. Dr. Michael Tiemann, M. Sc. Andrej Paul

Issue 1 (2020) Volume 14

Peer-reviewed papers, 30 - 35

Additive manufacturing gaining ground

Prof. Dr.-Ing. Volker Schöppner

Issue 2 (2018) Volume 12

Editorial, 71

Weld strengths of sandwich components with glass-fibre-reinforced core components

Prof. Dr.-Ing. Volker Schöppner, M. Sc. Isabel Fiebig

Issue 2 (2018) Volume 12

Peer-reviewed papers, 87 - 93

Plasma-assisted joining of plastics

Prof. Dr.-Ing. Volker Schöppner, M. Sc. Patrick Lakemeyer, M. Sc. Timo Nordmeyer

Issue 2 (2016) Volume 10

Peer-reviewed papers, 100 - 108

Editorial

Prof. Dr.-Ing. Volker Schöppner

Issue 2 (2014) Volume 8

Editorial, 79

Plastics welding: New developments at K 2013 - Machine manufacturers are pushing ahead with the technology

Prof. Dr.-Ing. Volker Schöppner

Issue 1 (2014) Volume 8

Events, 14 - 17

The behaviour of flame-protected materials in the plastics welding process

Prof. Dr.-Ing. Volker Schöppner, M. Sc. Fabian Evers, M. Sc. Matthias Lexow

Issue 3-4 (2013) Volume 7

Peer-reviewed papers, 182 - 189

Reducing the cycle time in heated tool welding without any loss in quality as a result of forced cooling using compressed air

Prof. Dr.-Ing. Volker Schöppner, Dipl.-Wirt.-Ing. Norman Friedrich

Issue 2 (2012) Volume 6

Peer-reviewed papers, 134 - 141

Self-optimisation and quality assurance on the basis of a new machine concept in the case of heated tool welding

Prof. Dr.-Ing. Helmut Potente, Prof. Dr.-Ing. Volker Schöppner, Dipl.-Wirt.-Ing. Reinhild Hoffschlag

Issue 3-4 (2011) Volume 5

Peer-reviewed papers, 208 - 214

Investigations into the melt adhesion during heated tool welding

Prof. Dr.-Ing. Helmut Potente, Prof. Dr.-Ing. Volker Schöppner, Dipl.-Wirt.-Ing. Reinhild Hoffschlag

Issue 2 (2010) Volume 4

Peer-reviewed papers, 102 - 107

Optical residual stress analysis of laser beam welded plastic components

Prof. Dr.-Ing. Volker Schöppner, Dipl.-Ing. Dirk Bonefeld

Issue 1 (2010) Volume 4

Peer-reviewed papers, 40 - 47

Saving cycle time by means of intensive cooling during heated tool welding

Prof. Dr.-Ing. Helmut Potente, Prof. Dr.-Ing. Volker Schöppner, Dipl.-Wirt.-Ing. Reinhild Hoffschlag, Dr.-Ing. Joachim Schnieders, Dipl.-Ing. Stefan Gövert

Issue 1 (2008) Volume 2

Peer-reviewed papers, 50 - 56